Karina Grung nackt sorted by
relevance

Admin20.08.2021

blog.u-pic.com

Of these, the top piston ring has inner bevels and the second piston ring has a cut on the bottom outside to reduce oil consumption.
Admin09.07.2021

EJ208 Subaru Engine

0 mm stroke for a capacity of 2457 cc.
3304
Admin29.07.2021

EJ208 Subaru Engine

When engine load increased, advancing the intake closing time utilised the inertia of the intake air to create a supercharging effect; and,• In Australia, the EJ208 engine was introduced in the 2001 which, with a manual transmission, produced peak outputs of 190 kW and 320 Nm.
309
Admin06.08.2021

EJ208 Subaru Engine

The connecting rods for the EJ255 engine were made from forged high carbon steel, while big end cap dowel pins and set screws were used for accurate mating.
4705
Admin09.07.2021

blog.u-pic.com

Subaru EJ255 engine Model Engine Trans.
3002
Admin14.06.2021

EJ208 Subaru Engine

Crankshaft, connecting rods and pistons For the EJ208 engine, the crankshaft was supported by five bearings that were made from aluminium alloy.
Admin07.07.2021

blog.u-pic.com

The piston head and ring grooves were coated with Alumite, while the piston skirts had a molybdenum coating to reduce friction.
1702
Admin23.06.2021

EJ255 Subaru Engine

Each camshaft was supported at three journals, held in position by three camshaft caps and had a flange which fitted the corresponding groove in the cylinder head to receive thrust forces.
8500
Admin06.09.2021

blog.u-pic.com

It is understood that peak boost pressure for the EJ208 engine was 0.
9007
Admin13.08.2021

EJ255 Subaru Engine

933 bar at 4800 rpm.
4502
Admin10.06.2021

blog.u-pic.com

, 5sp auto 195kW at 5600rpm 350Nm at 2400-5200rpm 2009-14 8.